apl論文格式

　　APL投稿時，需要什么提交格式，要提交哪些材料?

　　投過一篇，發現被直接拒稿。后來才想明白，原來投稿系統中可能有個功能，看看有沒有引用APL的文獻，如果沒有，那就直接被拒了。編輯發給我的信中，也直接這樣寫了，說還是投到你引用的期刊上發表吧。

　　科研不知APL，投遍論文也枉然!實驗室的老師和師兄師姐們論文投稿的第一選擇都是APL，錄了很多篇了，自己做了一個小東西，有點創意，但和拼指標的論文相比，相距甚遠!在老師的鼓勵下，寫了份詳細的稿件，老師看后，提出三點，也就是APL的精髓：A代表應用背景擴展，P代表物理模型解析，L代表新穎性和創新性。論文的重中之重要先L，再P，最后A!自己在這樣的思路指導下，堅決執行L-P-A順序?qū)φ撐拈_始重新組織：L是老師給指出來;P的話，花了很長時間，大概一個多月，讀了30多篇相關文章，模型根基才算打牢;和老師商量了A，再把圖片一個個的清晰化(很關鍵)，前后2個月，完成文章!投出去后，趕上圣誕節，到大年初二，意見回來： Reviewer #1 (Comments to the Author): This is a useful contribution to the field. It should be published "as is".

　　這是個比較快的雜志，收和拒都很快的，如果你做的比較有新意，可以選擇投稿，去年投了一篇，修了兩次接受大概用了3各月，今年投了兩篇，一篇投稿四天后直接接受(這個有一定運氣成分，但這篇文章準備了一年半，之前修改的比較多了) 一共投稿五次，中了兩篇，一篇送審。文章要有很新的物理思想，

　　倘若結果不好，就要看論文通篇的寫法。最近幾年，稿件的標準有所提高，最通常的原因往往是因為稿件缺乏深刻的物理內涵。所以最適合投稿APL的工作是，有足夠的創新性，并且通過深入談?wù)�，得出非常明了、直接的結論。

　　APL老牌雜志，影響廣泛。 因為存在pre-screening，編輯直接拒稿率較高。一個審稿人，存在較大隨機性，不過一般審的都不錯(畢竟是老牌雜志，審稿人數據庫比較完善)。個人認為要比nano letters等“家族”式期刊更具參考價值。其論文被引用總量在SCI期刊也是佼佼者。值得投稿!

　　材料類全球權威期刊，去年中了一篇，前后大修2次，小修1次，APL審稿速度很快，從投遞初稿，到修改，接收，整個來回將近20天。最大的感觸就是APL的摘要需要限制在100個單詞之內 APL上面的文章，比較強調時效性、與應用和實驗研究掛鉤。好處是剛出來時候看的人多，缺點是讀者興趣隨時間快速衰減。與它互補的有發表長篇的J. Appl. Phys. (JAP)。

　　APL是二類雜志中比較好的。特點是研究內容容新，具有應用背景�，F(xiàn)在是一個人審稿，審稿速度超快。文章的觀點明確，內容較短。內容新穎，具有物理思想的文章中APL比較容易。

　　應用物理類的最好期刊，要求的東西比較新，而且有一點的物理思想。1要足夠Applied，沒有應用背景的文章比較難中， 2要有Physics，沒有物理思想，或者物理思想不清晰的文章會比較困難，3是Lett，就是要新，別人沒做過的。

　　apl投稿注意事項：

　　前段時間投了一篇APL,花了好長時間都沒有結果，其實是未投完。為防止蟲友們犯類似錯誤，現將apl投稿注意事項和大家分享。

　　We note that you still have an unfinished submission at the APL manuscript submission & peer-review website. Please complete that process as soon as possible. If you no longer wish to make the submission, then please email us so that we can close out your submission.(投完后轉換成pdf后覺得沒問題一定要確定)

　　In checking in your manuscript data and files submitted to Applied Physics Letters, it has come to our attention that the following must be addressed before we can begin the peer review process:

　　************************

　　ALL authors must be included in the submission form so that they will be linked with the manuscript. Please return to the submission form and complete the author list.---The submission form is located in Modify Manuscript Metadata.

　　Submit a SEPARATE Figure file for EACH figure cited in the article; NOT one file containing all figures. Submit only one figure per file. Submit all the parts of a figure as one file [e.g., Fig. 1(a), 1(b), and (c) in one file].

　　AIP prefers the following formats for Figure source files: TIFF (.tif), PostScript (.ps), Encapsulated PostScript (.eps). However, if you do choose PDF figure source files, please make sure that the guidelines for preparation of an acceptable PDF illustration are followed closely. Your manuscript may be delayed in the production process if the guidelines are not met. See http://ftp.aip.org/aipdocs/forms/pdf_figs.pdf

　　"First" and/or "to our knowledge" and/or "successfully" and/or "New" and/or Novel" are not allowed in the manuscript. Remove from your title, abstract and/or text.---New

　　Et al is not allowed in the Abstract.

　　Do not use "et al." in the reference list. Show all names with initials preceding.

　　An abstract, carrying the title and complete by-line, must be double-spaced and placed on a page separate from the Introduction.

　　Acronyms in the Abstract that are used only once are unnecessary there, but define ALL acronyms in the text the first time used.

　　Place the Equation numbers flush with the right margins.

　　Place the article file in the proper order - references, table, and then figure captions.

　　The Article file should ONLY contain the Title/By-line/Abstract page, Text, Reference page(s), Tables (if any), and Figure Captions. REMOVE the figures from the Article file.

　　Ticks to indicate coordinate values, placed within all four sides of the

　　graph, increase readability, and are recommended.

　　Please check the length of your article carefully. THE EDITORIAL OFFICE DOES NOT COUNT WORDS. THE LENGTH IS THE RESPONSIBILITY OF THE AUTHOR. See http://apl.aip.org or the "Estimates of Finished Length" link provided at the top of all APL PeerX-Press pages.

　　************************

　　*** IMPORTANT: Please note that you should NOT start the submission process over again, and submit your manuscript new. ***

　　Your manuscript has been placed back at the Author Approval of Converted Files stage, where you may again access it and make changes. Proceed to the following URL:

　　(You may need to copy/paste the complete URL into your browser's address/location bar, if clicking on it within your email reader doesn't work.)

　　On the Approve Files screen, you will also find a link to click that will display (in a separate browser window) this present SUBMISSION CHECK email letter, for your convenience.

　　*** DO NOT BEGIN A NEW SUBMISSION OF YOUR PAPER. Work with the data you have already entered and the files you have already uploaded. ***

　　Please make the correction(s) as specified above, and using the link supplied above, either replace, delete, or add files as appropriate. Be sure to view and approve any new converted PDF files, and then approve the complete submission package, which returns it to the editorial office for further processing.

　　We will check the modified submission package again, and send a followup email to advise you of its status for entry into peer review.

　　Thank you for submitting your work to the Applied Physics Letters.

【apl論文格式】相關文章：

論文格式03-17

法學論文格式11-28

論文格式及要求03-29

數模論文格式03-29

sci論文格式03-24

emba論文格式03-29

cnki論文格式01-18

istp論文格式11-13

論文格式制作11-13

改論文格式02-19